User`s guide

Conﬁguring

3-9

Type: iproute <port range> <functions>

For example, iproute 5-6 rip bootp would enable

routing on ports 5 and 6 with the RIP and bootp options on.

LCM responds:

Port 5 routing: IP Routing, RIP, Bootp relay

Port 6 routing: IP Routing, RIP, Bootp relay

3.2.6 Adding an IP Address to a Port

To add an IP address to an ATX port:

Type: ipaddr <port number> add <ip address>

For example, ipaddr 2 add 192.138.216.111

255.255.255.240 would add 192.138.216.111 and a subnet mask

of 255.255.255.240 to port 2. If you do not specify add, the IP

address and subnet mask will be added if none already exists. If

the port already has an IP address and subnet mask assigned to it,

and the “add” command is not used, the new entry will overwrite

it.

LCM responds by displaying the updated IP Address entry for the

port that changed. To see the full IP Address Table, enter ipaddr

with no arguments, for example: ipaddr

Port IP Address Address Mask MAC Address

2 192.138.217.1 255.255.255.255 00:40:27:00:06:1f

2 192.138.217.2 255.255.255.255 00:40:27:00:06:1f

3 0.0.0.0 255.0.0.0 00:40:27:00:06:c3

4 192.138.217.10 255.255.255.0 00:40:27:00:06:3e

5 0.0.0.0 255.0.0.0 00:40:27:00:03:7a

6 0.0.0.0 255.0.0.0 00:40:27:00:05:c7