User`s guide

3-10

Conﬁguring

Note: All IP addresses sharing a common subnet must use the same

subnet mask. In addition, two IP addresses assigned to the same

physical interface must belong to distinct IP subnetworks.

To add and delete multiple IP addresses on an ATX port, the

following subcommands have been added to the LCM ipaddr

command:

• add – Allows you to add an IP address to an ATX port.

• delete – Allows you to delete an IP address from an ATX port.

• clearALL – Allows you to delete all IP addresses from an ATX

port.

3.2.7 Deleting an IP Address From a Port

To delete an IP address from an ATX port.

Type:

ipaddr <port number> delete <ip address>

For example, ipaddr 2 delete 192.138.216.111 would

delete IP address 192.138.216.111 from port 2. LCM responds by

prompting for the next command. To display the current IP

Address Table, type ipaddr with no arguments.

3.2.8 Clearing All IP Addresses From a Port

To clear all IP addresses from an ATX port:

Type: ipaddr <port number> clearALL

For example,

ipaddr 2 clearALL would delete all of the IP

7 192.138.217.20 255.255.255.0 00:40:27:00:04:4a

8 192.138.217.50 255.255.255.0 00:40:27:00:06:9e

9 192.138.217.30 255.255.255.0 00:40:27:00:04:b4

Port IP Address Address Mask MAC Address