User`s guide

3-14

Conﬁguring

Type: ipxaddress

Table 3-2. Displaying IPX Addresses

3.3.3 Enabling IPX Routing Functions

The IPX routing functions you can enable for ports on the ATX

may be:

• Off – no IPX routing at all

• On – IPX routing

• SR – IPX routing over source routing

To use LCM to enable IPX routing functions for a port or port

range, starting from the LCM prompt:

Type: ipxroute <port range> <functions>

For example, ipxroute 5-6 would enable IPX routing on ports 5

and 6. LCM responds:

Port 5 IPX routing: enabled

Port 6 IPX routing: enabled

Port IPX Network Node ID Framing

2 0x11223344 00:40:27:00:06:1f Ethernet 802.3

3 0x55667788 00:40:27:00:06:c3 Ethernet 802.3

4 0x99001122 00:40:27:00:06:3e Ethernet 802.3

5 0x33445566 00:40:27:00:03:7a LLC 802.2

6 0x12345678 00:40:27:00:05:c7 Ethernet 802.3

7 0x77665544 00:40:27:00:04:4a LLC 802.2

8 0x31265488 00:40:27:00:06:9e Ethernet 802.3

9 0x22446688 00:40:27:00:04:b4 Ethernet 802.3