User`s guide

Configuring
3-15
3.3.4 Displaying IPX Routing Functions
To display the IPX routing functions that are enabled for all ports:
Type: ipxroute
LCM responds with a list of all ports and the routing functions that
are enabled.
Usage: ipxroute [PORT-RANGE [{off | on | sr}]]
Port 2 IPX routing: enabled
Port 3 IPX routing: enabled
Port 4 IPX routing: enabled
Port 5 IPX routing: enabled
.
.
.
Port 21 IPX routing: enabled
You could also type: ipxroute <port range> to look at a
specific port or ports. For example, ipxroute 2-4 would display
routing functions for ports 2, 3, and 4.
3.3.5 Disabling IPX Routing
To turn off the IPX routing functions for a port or port range:
Type: ipxroute <port range> <off>
LCM responds:
Port 2 IPX routing: disabled
3.4 CONFIGURING APPLETALK ROUTING
AppleTalk routing can be enabled on a per port basis using the
Local Console Manager (LCM). (For basic LCM commands and
command syntax, refer to Chapter 1, Local Console Manager)
When you enable AppleTalk routing, the first port you enable
starts the seed process to enable all AppleTalk routers to acquire