User`s guide

3-20
Configuring
Port 6 Engineering
To make the zone name you are adding the designated default
zone name:
Type: atzone <port number> <“zone name”> on
default
.
For example, atzone 6 “Engineering” on default, would
create the default zone name Engineering on port 6. LCM
responds:
AppleTalk Zones
Port 6
(default)Engineering
3.4.7 Displaying a Zone Name
You can use LCM to display AppleTalk zone names that are
currently assigned. To display zone names:
Type: atzone
LCM responds:
Usage: atzone [<Port number> “<Name>” {on|off}
[default]]
AppleTalk Zones
Port 6
Engineering
3.5 CONFIGURING TRUNKING
If your network configuration requires you to connect two or more
ATXs together, but the applications you are running over the
network require more than a single LAN connection (10 Mbps of
bandwidth for Ethernet) between ATXs, you can use the built-in
trunking feature to raise bandwidth up to 8 times the single LAN
connection bandwidth (80 Mbps for Ethernet), without installing