User`s guide

3-24
Configuring
3.7.2 System Name
The system name is a name assigned to the ATX by the network
administrator. By convention, the system name is the fully
qualified domain name. (This name then becomes the LCM
prompt.)
sysName - {system 5}
DisplayString (SIZE (0..255))
3.7.3 System Location
The system location identifies the physical location of the ATX.
sysLocation - {system 6}
DisplayString (SIZE (0..255))
3.7.4 Authentication Password
The set password and get password variables (from the Cabletron
MIB Configuration Status Group) must be initialized with the
correct authentication passwords.
All requests from any SNMP manager contain a community name
field. For set requests, the community name must match the set
password; otherwise, the request will be rejected by the ATX. For
get requests, the community name must match either the set
password or the get password.
Set Password
The set password variable (configAnyPass) must be set to the value
of the community name used by the SNMP manager for
performing either set or get operations. A zero length password
means that any community name is acceptable.
configAnyPass - {config 2}
DisplayString (SIZE (0..24))
This variable is also used as the login password for LCM.