User`s guide
Chapter 4: Monitoring and Managing the 3F00-01 and 3F55-01
FDDI Dual-Attached Intelligent Module User’s Guide Page 4-9
• The number of Master ports. This is always 0. [snmpFddiSMTMasterCt]
• The types of paths available. This is always 1 (primary path only).
[snmpFddiSMTPathsAvailable]
• The capabilities that are supported by the port. This is always 0.
[snmpFddiSMTConfigCapabilities]
• The capabilities that are currently being enforced by the port. This is
always 0. [snmpFddiSMTConfigPolicy]
• The connection restrictions that are currently being enforced by the
port. [snmpFddiSMTConnectionPolicy]
• The value for the NIF T_Notify timer, in seconds.
[snmpFddiSMTNotify]
• Whether the port supports the SRF protocol. This is always true (1).
[snmpFddiSMTStatusReporting]
• The current state of the port’s ECM state machine.
[snmpFddiSMTECMState]
• The current state of the port’s CFM state machine.
[snmpFddiSMTCFState]
• The current state of the port’s Hold function. This is always
not-implemented (1).
[
snmpFddiSMTHoldState]
• Whether the port has been intentionally disconnected.
[snmpFddiSMTRemoteDisconnectFlag]
• A value that is greater than, or equal to, the time stamp used in the last
SMT frame.
[
snmpFddiSMTMsgTimeStamp]
• The time stamp of the last SRF condition or event.
[snmpFddiSMTTransitionTimeStamp]
4.2.3.2 SMT Version 7.3
• Used to uniquely identify an FDDI station. [fddimibSMTStationId]
• The version that this station is using for its operation.
[
fddimibSMTOpVersionId]