User`s guide
Chapter 4: Monitoring and Managing the 3F00-01 and 3F55-01
Page 4-18 FDDI Dual-Attached Intelligent Module User’s Guide
• A value that indicates the connection capabilities of the PORT.
[
fddimibPORTConnectionCapabilities]
• This variable assumes the value of the
BS_Flag. [fddimibPORTBSFlag]
• The count of the consecutive times the Link Confidence Test (LCT)
has failed during connection management. [fddimibPORTLCTFailCts]
• A long term average link error rate. [
fddimibPORTLerEstimate]
• A link error monitoring count of the times that a link has been rejected.
[fddimibPORTLemRejectCts]
• The aggregate link error monitor error count, set to zero only on station
initialization. [fddimibPORTLemCts]
• The link error rate estimate at which a link connection will be broken.
[fddimibPORTLerCutoff]
• The link error rate estimate at which a link connection will generate an
alarm. [fddimibPORTLerAlarm]
• An indication of the connect state of this PORT which is equal to the
value of Connect_State. [fddimibPORTConnectState]
• The state of this PORT’s PCM state machine. [
fddimibPORTPCMState]
• The value of
PC_Withhold. [fddimibPORTPCWithhold]
• The condition becomes active when the value of
fddiPORTLerEstimate
is less than or equal to
fddiPORTLerAlarm. [fddimibPORTLerFlag]
• This variable indicates the presence of underlying hardware support
for this PORT object. [fddimibPORTHardwarePresent]
• A PORT action to be performed. [
fddimibPORTAction]
4.2.6 3F00-01/3F55-01 PATH Group
This group applies to SMT version 7.3 only.
• The total number of PATHs possible (across all FDDI ports) on this
unit. [fddimibPATHNumber]
• Specifies the minimum time value of
fddiMACTvxValue that shall be
used by the MAC that is configured in this PATH.
[
fddimibPATHTVXLowerBound]