Specifications

Device Management 65 SmartSwitch6000
7 See Positioning the Chassis Device Icon,
below, to properly locate the automatically
created chassis Device icon.
Positioning the Chassis Device
Icon
Some of the modeling procedures described above
automatically create a chassis Device icon. This
icon can be copied into a Room Location view.
1 Create a Room Location view using Steps 1
through 10 in Modeling Using the Chassis IP
(Page 62).
2 To locate the chassis Device icon, activate the
Topology view and select Utilities > Search
Manager.
3 Copy the chassis Device icon into the Room
Location view as follows:
a Within the Find view, select File > Edit.
b Select 6C105.
c From the Edit menu, select Copy.
d Access the Room Location view and select
File > Edit to enter the Edit mode.
e Select Paste.
The icon appears in the Room Location view.
f Exit the Edit mode.