- Cabletron User's Guide SmartSwitch Interface Modules 6H258-17, 6H259-17

Installation 3-1

Installation

This chapter covers the following items:

• Unpacking the SmartSwitch (Section 3.1)

• Installing Options (Section 3.2)

• Installing the SmartSwitch into the 6C105 Chassis (Section 3.3)

• Connecting to the Network (Section 3.4)

• Completing the Installation (Section 3.5)

3.1 UNPACKING THE SMARTSWITCH

1. Open the box and remove the packing material protecting the module.

2. Verify the contents of the carton as listed in Table 3-1.

Only qualified personnel should install the SmartSwitch.

NOTE

Read the Release Notes shipped with the device to check for any exceptions to the

supported features and operation documented in this guide.

Table 3-1 Contents of SmartSwitch Shipping Container

Item Quantity

SmartSwitch 1

Manual Accessory Kit 1