Installation guide

SPECTRUM
Installation Guide
Page 10
Document 0675
Getting Started
This guide contains prerequisites, instructions,
troubleshooting tips, and reference information related to
SPECTRUM installation. Refer to the table below to
determine where to begin the installation process and how
to proceed from there.
In this section:
Installation Process Tasks
[page 10]
Installation Process Tasks
The table below lists the common tasks for installing SPECTRUM. Use this
as a guide for determining how to proceed for your specific installation.
Chronology Task Applicable Sections
Before
Installation
Check the SPECTRUM system
requirements.
System Requirements
[page 11]
Optimize your operating
environment for best
performance.
Optimizing Your Operating Environment
for SPECTRUM [page 12]
Determine the type of installation
you need to perform.
Types of SPECTRUM Installations
[page 18]
Complete the installation
prerequisites.
Installing on Solaris [page 22]
Installing on Windows [page 32]
During
Installation
Run the installation software. Running the Installation Software
[page 39]
Troubleshoot, if necessary. Troubleshooting [page 102]
After
Installation
If you are upgrading SPECTRUM,
you must also upgrade your
SPECTRUM models, model types,
and management modules.
Upgrading SPECTRUM Models, Model
Types, and Management Modules
[page 84]
Complete postinstallation
procedures and configure your
system.
Starting SPECTRUM and Postinstallation
Configuration [page 74]