Installation guide

SPECTRUM
Installation Guide
Page 12
Document 0675
Table 2: Windows System Requirements
Optimizing Your Operating Environment for
SPECTRUM
Beyond the System Requirements [page 11], this section explains how to
configure your operating environment for optimum SPECTRUM
performance and efficiency.
Due to the complexities and variables of polling frequency, device types,
and the number of devices within a network, it is impossible to define all
possible configurations and system requirements for all users. Aprisma
recommends the configurations in Table 3 [page 13]
as a guideline for
SPECTRUM to take advantage of all system resources and run at peak
efficiency. The maximum benefit is achieved from any system when all
three system resources—memory, processor, and disk space—are robust
enough that no one resource limits any of the others.
Consult your Aprisma support or sales representative for more help in
determining the ideal configuration for your network.
Component Requirement
Operating System Windows NT 4.0 with Service Pack 6a or later, or
Windows 2000 (service packs supported but not required)
Memory (RAM) Dependent on configuration and number of managed devices
(see Table 3 [page 13]
)
Processor Dependent on configuration and number of managed devices
(see Table 3 [page 13]
)
Disk Space Dependent on configuration and number of managed devices
(see Table 3 [page 13]
)
Video System 2 MB PCI bus card capable of 32-bit color at 1024 x 768 pixel
resolution
20-inch or larger monitor
X server Hummingbird Exceed 7.1.0.2 (included with SPECTRUM)
Web Browser Internet Explorer 5.5 or 6.0, or Netscape 4.7x, 6.1, or later
PDF Document Viewer Acrobat Reader With Search 5.x or later (see Documentation CD
ReadMe file)