Installation guide

SPECTRUM
Installation Guide
Page 28
Document 0675
Stopping the Process Daemon (processd) [Upgrades From
5.0.1 Only]
If you upgrading from SPECTRUM version 5.0.1, the SPECTRUM process
daemon, processd, must be shut down before you install the newer
version.
Procedure
1. Log on as root.
2. Navigate to:
SPECTRUM/SDPM
3. Run the following command:
./processd.sh stop
Processd automatically restarts when you reboot the system after
installation. If you quit the installation before it is complete you can restart
processd without rebooting.
Procedure
1. Navigate to:
SPECTRUM/SDPM
2. Run the following command:
./processd.sh start