Installation guide

SPECTRUM
Installation Guide
Page 31
Document 0675
mkdir -p <$SPECROOT>/SS/DDM
Important: Do not use /opt/SPECTRUM as an installation
directory name; this location is reserved for a
directory that will be created automatically during
the installation.
7. Copy or FTP (in binary mode) the dbsavefile.SSdb file from step 4
to the new <$SPECROOT>/SS directory.
8. Copy or FTP (in binary mode) the dbsavefile file from step 5
to the
new <$SPECROOT>/SS/DDM directory. When this step is completed, the
new installation directory structure should match Figure 1 [page 31]
.
Figure 1: Directory Structure—Migration and Upgrade
(Solaris)
9. Install SPECTRUM (see Running the Installation Software
[page 39])
after all prerequisites have been met (see Prerequisites (Solaris)
[page 22]).
10. Follow the procedures in Upgrading SPECTRUM Models, Model Types,
and Management Modules [page 84].
New SPECTRUM installation directory
SS subdirectory
DDM subdirectory
dbsavefile.SSdb
dbsavefile
(file containing saved SpectroSERVER
database from the current SPECTRUM
location)
(file containing saved Events and Statistics
database from the current SPECTRUM
location)