Installation guide

SPECTRUM
Installation Guide
Page 37
Document 0675
program will not run if your database is locked, as it is whenever
SpectroSERVER is running. If shutting down your SpectroSERVER is
not feasible, consult your Aprisma support or sales representative
before continuing.
6. Install SPECTRUM (see Running the Installation Software
[page 39])
after all prerequisites have been met (see Prerequisites (Windows)
[page 32]).
7. Follow the procedures in Upgrading SPECTRUM Models, Model Types,
and Management Modules [page 84].
Migration and Upgrade (Windows)
This section contains the procedure for moving your current SPECTRUM
databases to a new location where you are upgrading to the new
SPECTRUM version. Follow this procedure carefully to preserve your
existing SPECTRUM data.
Procedure
1. In SpectroGRAPH, destroy any remote landscapes in your existing
database.
2. In User Editor, create a SPECTRUM user model that matches the
name of the owner of the directory where you will be installing the
new SPECTRUM version.
3. Make a copy of your current SpectroSERVER database using the
Online Backup utility (see Using the Online Backup Utility
[page 109]).
4. Rename the database backup copy you created in step 3
as:
dbsavefile.SSdb
Important: Use this exact file name.
5. Save your current SPECTRUM Events and Statistics database.
a. Open a command prompt.
b. Navigate to:
<$SPECROOT>\SS\DDM
c. Run the following command:
.\ddm_save dbsavefile