Installation guide

SPECTRUM
Installation Guide
Page 38
Document 0675
6. Create a SPECTRUM installation directory (<$SPECROOT>) where the
new version of SPECTRUM will reside.
7. Within <$SPECROOT>, create an SS subdirectory and navigate to that
subdirectory.
8. Copy or FTP (in binary mode) the dbsavefile.SSdb file from step 4
to the new <$SPECROOT>\SS subdirectory.
9. In the SS subdirectory, create a DDM subdirectory.
10. Copy or FTP (in binary mode) the dbsavefile from step 5
to the new
<$SPECROOT>\SS\DDM subdirectory. When this step is completed, the
new installation directory structure should match Figure 2:
Directory
Structure—Migration and Upgrade (Windows).
Figure 2: Directory Structure—Migration and Upgrade
(Windows)
11. Install SPECTRUM (see Running the Installation Software
[page 39])
after all prerequisites have been met (see Prerequisites (Windows)
[page 32]).
12. Follow the procedures in Upgrading SPECTRUM Models, Model Types,
and Management Modules [page 84].
New SPECTRUM installation directory
SS subdirectory
DDM subdirectory
dbsavefile.SSdb
dbsavefile
(file containing saved SpectroSERVER
database from the current SPECTRUM
location)
(file containing saved Events and Statistics
database from the current SPECTRUM
location)