Installation guide

SPECTRUM
Installation Guide
Page 75
Document 0675
deprecating obsolete models and model types, see Upgrading SPECTRUM
Models, Model Types, and Management Modules [page 84].
Configuring SPECTRUM CORBA Services
Some SPECTRUM operations rely on CORBA agents. When these agents are
started on the local network, they discover each other using UDP broadcast
messages. If your SPECTRUM environment spans multiple broadcast
domains, make sure the primary IP address of the host for each of these
agents is available to the agents in different domains.
Complete this procedure for each system on which SPECTRUM Components
are installed.
Procedure
[Windows]
1. If Spectrum Visibroker SmartAgent is running, complete the
following steps to stop the process.
a. From the Windows Control Panel, select Administrative Tools >
Services.
b. Select Spectrum Visibroker SmartAgent.
c. Select Action > Stop.
2. Navigate to:
<$SPECROOT>\bin\VBOA
3. Create a file named agentaddr.
4. In the
agentaddr file, create a list of the IP Addresses of all
workstations outside of your SpectroSERVER’s broadcast domain.
Place a carriage return at the end of this list, so the agent can read
the last entry.
5. Restart Spectrum Visibroker SmartAgent.
6. Using the Registry Editor (
regedit.exe), verify that the following
subkey appears in the registry:
HKEY_LOCAL_MACHINE/SOFTWARE/Visigenic Software Inc
If the Visigenic Software Inc subkey does not appear in the
registry, do the following: