Installation guide

SPECTRUM
Installation Guide
Page 76
Document 0675
a. Using the Registry Editor, add the Visigenic Software Inc subkey
information as indicated by bold text in Figure 1
:
Figure 1: Visigenic Software Inc Subkey
b. Restart Spectrum Visibroker SmartAgent.
[Solaris]
1. If Spectrum Visibroker SmartAgent is running, complete the
following steps to stop the process.
a. From CDE select Tools > Find Process. The Process Manager
opens.
b. Select processd.
c. Select Process > Kill.
2. Navigate to:
<$SPECROOT>/bin/VBOA
3. Create a file named agentaddr.
4. In the
agentaddr file, create a list of the IP Addresses of all
workstations outside of your SpectroSERVER’s broadcast domain.
Place a carriage return at the end of this list, so the agent can read
the last entry.
5. In the <$SPECROOT>/spectrum60.env file, add the following
variables:
VBROKER_ADM=<$SPECROOT>/bin/VBOA
OSAGENT_PORT=14000
6. Save and close the spectrum60.env file.
7. Restart
processd.
- HKEY_LOCAL_MACHINE
- SOFTWARE
- Visigenic Software Inc
- Visibroker
- 3.0
- OSAGENT_PORT:REG_SZ:14000
- PathName:REG_SZ:<$SPECROOT>/bin/VBOA
- vbc:REG_SZ:
- vbj:REG_SZ:
- VBROKER_ADM:REG_SZ:<$SPECROOT>/bin/VBOA