Installation guide

SPECTRUM
Installation Guide
Page 77
Document 0675
Changing the OSAGENT_PORT
You can configure SPECTRUM to use an osagent port (OSAGENT_PORT)
other than the default of 14000. In environments where Visibroker
applications in addition to SPECTRUM are used, each Visibroker application
must have a unique osagent port to avoid conflicts. Additionally, to avoid
conflict in a distributed SPECTRUM environment, you can define a unique
OSAGENT_PORT for each distributed SpectroSERVER.
Complete this procedure to change the OSAGENT_PORT.
Procedure
1. Use one of the following procedures to change the osagent port.
[Windows]
a. From the Windows Control Panel, open System.
b. On the Advanced tab, click Environment Variables.
c. From the Environment Variables dialog, highlight the
OSAGENT_PORT system variable and click on the Edit... button.
d. Change the variable value to the new port number and click OK.
e. Click OK in the Environment Variables dialog.
f. Reboot your system.
[Solaris]
a. Open the
/opt/SPECTRUM/spectrumXX.env file for editing.
b. Replace the value of the
OSAGENT_PORT variable with the new port
value (for example,
OSAGENT_PORT=14001).
c. Save and exit the file.
d. Restart the SPECTRUM
processd. For more information about
processd, see the Distributed SpectroSERVER (2770) guide.