Installation guide

SPECTRUM
Installation Guide
Page 78
Document 0675
Scheduler Requirements (Windows)
This section describes how to configure the Windows Scheduled Tasks
service to work with the SPECTRUM Scheduler.
Procedure
1. [Windows NT] Select Start > Windows NT Explorer.
[Windows 2000] Select Start > Settings > Control Panel.
2. Open Scheduled Tasks.
3. Select Advanced > AT Service Account.
4. In the AT Service Account Configuration dialog box, select This
Account.
5. Enter a user name (including the domain, if applicable) of a valid
SPECTRUM user (e.g., “WORKGROUP\jsmith”).
Note: By default, this field contains the current user. If
the default is the SPECTRUM user, no change is
necessary.
SPECTRUM scheduled tasks are run on behalf of the designated user.
6. Enter the user’s password in the Password and Confirm Password
fields.
Important Files Created During Installation
The SPECTRUM installation adds the following file types:
SPECTRUM Process Daemon (processd) Files
[page 78]
SPECTRUM Remote Administration Daemon (SRAdmin) Files [page 79]
Installation Database Savefiles [page 79]
SPECTRUM Process Daemon (processd) Files
The SPECTRUM installation adds a SPECTRUM process daemon (processd)
file to the following startup areas of Solaris operating systems:
/etc/init.d/processd
/etc/init.d/processd.pl
/etc/rc0.d/K09processd