Installation guide

SPECTRUM
Installation Guide
Page 79
Document 0675
/etc/rc2.d/S97processd
WARNING! These files are required for SPECTRUM operation
and should not be removed.
For more information about processd, see the Distributed SpectroSERVER
(9032770) guide.
SPECTRUM Remote Administration Daemon (SRAdmin)
Files
The installation adds the SPECTRUM Remote Administration daemon
(SRAdmin) files required by SPECTRUM for user authentication and
distributed administration:
/sw/SPECTRUM/SRAdmin/sradmin.exe
/etc/init.d/sradmin
/etc/rc0.d/K01sradmin
/etc/rc2.d/S99sradmin
WARNING! These files are required for SPECTRUM operation
and should not be removed.
Installation Database Savefiles
The SPECTRUM installation software automatically creates two savefiles in
the <$SPECROOT>/SS directory, each containing a copy of the database
modeling catalog being installed. The first file is date-stamped, with the
extension .after. A copy of the .after file is created and named
legacy.SSdb (overwriting any previous legacy.SSdb file).
The legacy.SSdb file is used with the SSdbload utility to reinitialize your
database with the most recently installed modeling catalog, while the
.after files let you restore the catalog associated with any particular
installation. A sequential counter following the date portion of the file name
lets you distinguish between multiple .after files generated on the same
day. For example, if three of these files were generated on May 4, 2002,
they would be labeled:
db_20020504,1.after.SSdb
db_20020504,2.after.SSdb
db_20020504,3.after.SSdb