Installation guide

SPECTRUM
Installation Guide
Page 90
Document 0675
procedure, delete that model and manually create it as a new
GnSNMPDev model or the appropriate LANPlex or Kentrux model type.
Troubleshooting
If the MT_dep_50R1_script.pl script does not run:
1. Make sure you are logged in as a valid SPECTRUM user.
2. Navigate to:
<$SPECROOT>/vnmsh
3. Run the following command:
./connect <SpectroSERVER host>
4. Run the following command:
./disconnect <SpectroSERVER host>
You may have to perform this procedure more than once.
Note: For more information on running the deprecation
script, see the README file in the
<$SPECROOT>/SS-Tools/MM_Dep_50R1 directory.
Convert_to_SSX.script
Convert_to_SSX.script converts models listed in Table 2, using the
procedure that follows.
Table 2: Models Converted by Convert_to_SSX.script
Old Model Type New Model Type Supports
Gen9000 9E5xx
(model type handle
0x3860001)
Cabletron SmartSwitch 9000
devices with the 9E5xx model type:
9E531-24
Gen9000 9G5xx
(model type handle
0x3860003)
Cabletron SmartSwitch 9000
devices with the 9G5xx model type:
9G536-04
Gen9000 9H5xx
(model type handle
0x3860002)
Cabletron SmartSwitch 9000
devices with the 9H5xx model type:
99H532-18, 9H531-18, 9H539-18,
9H532-17, 9H531-17, 9H539-17,
9H532-24, 9H531-24, 9H539-24,
9H533-24