Installation guide

SPECTRUM
Installation Guide
Page 97
Document 0675
Upgrading Nortel Accelar Models and Model Types
The section contains the procedure for upgrading the models and model
types listed in Table 5
, using the procedure that follows.
Table 5: Nortel Accelar Upgrade
Note: You can use Search Manager to determine if you
have models that meet this criteria. Create a
search where the model type name equals
“PassportDev” and device type attribute equals
“Accelar.”
Procedure
1. Start the SpectroSERVER.
2. Navigate to:
<$SPECROOT>/SS-Tools/Nortel
3. For a single landscape, run the following command:
<$SPECROOT>/SSHTools/DBconv –landscape=<landscape handle>
-file=Psp2Accelar.dbc
4. For a multiple landscapes, run the following command:
<$SPECROOT>/SSHTools/DBconv –all_landscapes
-file=Psp2Accelar.dbc
Old Model Type New Model Type Template
PassportDev
(model type handle
0x2ec0005)
Accelar1200
(model type handle
0x2ec0002)
Psp2Accelar.dbc