Installation guide

SPECTRUM
Installation Guide
Page 99
Document 0675
Upgrading Juniper Router Models and Model Types
The section contains the procedure for upgrading the models and model
types listed in Table 7
, using the procedure that follows.
Table 7: Juniper Router Upgrade
Procedure
1. Start the SpectroSERVER.
2. Navigate to:
<$SPECROOT>/SS-Tools/juniperConversion
3. Run the following command:
juniperConv.pl
4. At the prompt, enter the landscape handle (in hexadecimal format)
and the SpectroSERVER host name.
The script continues to run until the conversion process is complete.
5. Open juniperLog.txt to see a list of converted models.
Old Model Type New Model Type Script Details
JNPR_Mxxx JnprRedundRtr juniperConv.pl Improved redundancy
components for the M20,
M40e, and M160
devices.