Specifications

ATM Queue Statistics Table View
Device Management Page 104 SmartSwitch 9000/9500 Series
Clp Drop Threshold
The queue level to start dropping cells with a Cell
Loss Priority equal to one (CLP = 1). This level is
expressed as the percentage of this queue's size.
Congestion Threshold
The level at which to consider this queue
congested. This level is expressed as the
percentage of this queue's size.
EFCI Low Threshold
The lower threshold used for EFCI for this queue.
This level is expressed as the percentage of this
queue's size.
RM Threshold
The RM queue threshold expressed as a
percentage of the queue's size. When this level is
hit, a management message is sent to the sender
notifying it to slow down.
Queue Statistics Table View
Access: From the Icon Subviews for a SFCS Device icon,
select SFCS Queue > Statistics.
This table contains the statistics information for
all queues on the SFCS. It provides the following:
If Index
A unique value that identifies the interface with
which you are dealing.
Queue
The index that specifies the queue with which you
are dealing.
Tx Cells Discarded
The number of cells with CLP=1 that were
discarded.
Tx Cells Dropped
The number of cells that overflowed the buffer.
Peak Level
The peak level since last read.
Tx Cells
The transmit cell count on a per queue basis.
CTM Interface Configuration
Table View
Access: From the Icon Subviews for a SFCS Device icon,
select SFCS CTM > Interface Configuration.
This table contains the configuration information
of each configured SHEMP interface. It provides
the following:
If Index
The unique value that identifies which interface
you are dealing with.