Specifications

ATM CTM Queue Configuration Table View
Device Management Page 106 SmartSwitch 9000/9500 Series
VPI Lookup Invalid Errs
The number of VPI lookup invalid and out of
range errors.
Rx Cnx Lookup Invalid Errs
The number of receive connection lookup invalid
errors.
Allocated Rx BW
The allocated receive bandwidth.
Allocated Tx BW
The allocated transmit bandwidth.
Rx Cell Count
The number of receive cells on this interface.
CTM Queue Configuration
Table View
Access: From the Icon Subviews for a SFCS Device icon,
select SFCS CTM > Queue Configuration.
This table contains the CTM configuration
information for all queues on the SFCS. It
includes the following:
IF Index
A unique value that identifies the interface with
which you are dealing.
Queue
The index that identifies the transmit queue with
which you are dealing.
Size
The size of the transmit queue.
Bandwidth
The percentage of this interface's bandwidth
utilized by this particular queue.
Clp Drop Threshold
The queue level to start dropping CLP=1 cells for
this queue. This level is expressed as the
percentage of this queue's size.
Congestion Threshold
The level at which to consider this queue
congested. This level is expressed as the
percentage of this queue's size.
EFCI Low Threshold
The lower threshold used for Explicit Forward
Congestion Indication (EFCI) for this queue. This
level is expressed as the percentage of this
queue's size.
RM Threshold
The Remote Management (RM) queue threshold
expressed as a percentage of the queue's size.
When this level is hit, a management message is
sent to the sender notifying it to slow down.