Specifications

ATM BW Manager Port Pool Trap Management Table View
Device Management Page 116 SmartSwitch 9000/9500 Series
RXInterval
The number of seconds between retransmissions
of unacknowledged database summary packets,
PTSE request packets, and PNNI Topology State
Packets (PTSP). The default value is 5.
DlyActIntvl
The minimum amount of time between
transmissions of delayed PTSE acknowledgment
packets, in units of 100 milliseconds. The default
value is 10.
AVCRPM
The proportional multiplier used in the
algorithms that determine significant change for
available cell rate (AvCR) parameters, expressed
as a percentage. The default value is 50.
AVCRMt
The minimum threshold used in the algorithms
that determine significant change for available
cell rate (AvCR) parameters, expressed as a
percentage. The default value is 3.
CDVPm
The proportional multiplier used in the
algorithms that determine significant change for
cell delay variation (CDV) metrics, expressed as a
percentage. The default value is 25.
CtDPm
The proportional multiplier used in the
algorithms that determine significant change for
cell transfer delay (CTD) metrics, expressed as a
percentage. The default value is 50.
SVCC Variable Information View
Access: From the Nodal Information Map Information view,
click the SVCC Variable Information button.
This view provides Switched Virtual Channel
Connection (SVCC) information as follows.
Index
The index value for the node.
InitTime
The time, in seconds, this node delays
establishing an SVCC to a neighbor with a
numerically lower ATM address after determining
that such an SVCC should be established. The
default value is 4.
RetryTime
The time, in seconds, this node delays before
attempting to re-establish an apparently still
necessary and viable SVCC-based RCC after it is
unexpectedly torn down. The default value is 30.