Specifications

ATM Interface Views
Device Management Page 118 SmartSwitch 9000/9500 Series
ATM Interface Configuration View
Access: From the Icon Subviews menu for the Switch
Application icon, select Interface > Configuration.
This view provides the following information on
the local interface configuration parameters for
each ATM interface or port.
If Index
The interface number.
Max VPCs
The maximum number of VPCs (PVC and SVC)
supported by the ATM interface.
Max VCCs
The maximum number of VCCs (PVC and SVC)
supported by this ATM interface.
Conf VPCs
The number of VPCs currently in use on this ATM
interface. This includes the number of PVCs and
SPVCs that are configured on the interface, plus
the number of SVCs that are currently
established on the interface.
Conf VCCs
The number of VCCs currently in use on this ATM
interface. This includes the number of PVCs and
SPVCs that are configured at the interface plus
the number of SVCs that are currently
established on the interface.
Max VPI Bits
The maximum number of active VPI bits
configured for use at the ATM interface.
Max VCI Bits
The maximum number of active VCI bits
configured for use on the ATM interface.
ILMI VPI
The VPI value of the VCC supporting the Interim
Local Management Interface (ILMI) on the ATM
interface. If this value and the value of ILMI VCI
are 0, then ILMI is not supported on this
interface.
ILMI VCI
The VCI value of the VCC supporting the ILMI at
the ATM interface. If this value and the value of
ILMI VPI are 0, then ILMI is not supported on
this interface.
Address Type
The type of ATM address, such as private.
Admin Address
An address assigned for administrative purposes,
e.g., an address associated with the service
provider side of a public network UNI.