Specifications

ATM Cross Connect Views
Device Management Page 121 SmartSwitch 9000/9500 Series
Index
A unique value identifying the VC cross connect.
Low Index
The index value for the ATM interface for this VC
cross connect, which is numerically lower than
the Index value of the other ATM interface.
Low VPI
The VPI value at the ATM interface associated
with the VC cross connect that is identified by
Low Index.
Low VCI
The VCI value at the ATM interface associated
with the VC cross connect that is identified by
Low Index.
High Index
The index value for the ATM interface for this VC
cross connect, which is numerically higher than
the index value of the other ATM interface.
High VPI
The value equal to the VPI value at the ATM
interface associated with the VC cross connect
that is identified by High Index.
High VCI
The value equal to the VCI value at the ATM
interface associated with the VC cross connect
that is identified by High Index.
Admin Status
The desired administrative status of this bi-
directional VC cross connect. Up indicates that
the traffic flow is enabled on this VC cross
connect. Down means it is disabled.
L2H Oper Status
The current operational status (Up or Unknown) of
the VC cross connect in one direction (i.e., from
the low to high direction).
H2L Oper Status
The current operational status of the VC cross
connect in one direction (i.e., from the high to low
direction). UP indicates that this ATM VC cross
connect from the high to low direction is
operational. Unknown indicates that the state
cannot be determined.
L2H Last Change
The value of Sys Up Time (located in the Banner
area of the view) at the time this VC cross connect
entered its current operational state in the low to
high direction. If the current state was entered
prior to the last re-initialization of the agent, the
value is 0.
H2L Last Change
The value of Sys Up Time at the time this VC
cross connect entered its current operational
state in the high to low direction. If the current