Specifications

ATM Cross Connect Views
Device Management Page 122 SmartSwitch 9000/9500 Series
state was entered prior to the last re-initialization
of the agent, the value is 0.
Row Status
The status of this entry in the Cross Connect
Table. This is used to create new VCL cross
connects that are created using the VCL Table, or
to change and delete existing cross connects.
VP Cross Connect Table View
Access: From the Icon Subviews menu for the Switch
Application icon, select Cross Connect > Virtual Paths.
This view provides configuration and state
information for all point-to-point, point-to-
multipoint, and multipoint-to-multipoint VP cross
connects. The view provides read-create access,
which can be used to cross connect the VPLs
together in an ATM switch or network. The index
is used to associate the related VPLs that are
cross connected together.
Index
The unique value to identify this VP cross
connect.
Low Index
The value for the low interface Index of the ATM
interface for this VP cross connect.
Low Vpi
The value equal to the VPI value at the ATM
interface associated with the VP cross connect
that is identified by Low Index.
High Index
The value for the high interface Index of the ATM
interface for this VP cross connect.
High Vpi
The value equal to the VPI value at the ATM
interface associated with the VP cross connect
that is identified by High Index.
Admin Status
The desired administrative status of this bi-
directional VP cross connect. Up indicates that
the traffic flow is enabled on this VP cross
connect.
L2H Oper Status
Identifies the current operational status (Up or
Unknown) of the VP cross connect in one direction
(i.e., from the low to high direction).
H2L Oper Status
The current operational status (Up or Unknown) of
the VP cross connect in one direction (i.e., from
the high to low direction).