Specifications

ATM Links Views
Device Management Page 123 SmartSwitch 9000/9500 Series
L2H Last Change
The value of Sys Up Time at the time this VP
cross connect entered its current operational
state in the low to high direction. If the current
state was entered prior to the last re-initialization
of the agent, the value is 0.
H2L Last Change
The value of Sys Up Time at the time this VP
cross connect entered its current operational
state in the high to low direction. If the current
state was entered prior to the last re-initialization
of the agent, the value is 0.
Row Status
The status of this entry in the Cross Connect
Table. This is used to create VPL cross connects
that are created using the VPL Table or to change
and delete existing cross connects.
Links Views
Table 35 lists the menu options and views
available via the Links option on the Switch
Application Icon Subviews menu.
Table 35: Links Options and Views
Option Accesses the...
Virtual Channels Creating PVCs and PVPs,.
Virtual Paths Virtual Path Link Table View
(Page 126).
Tip:
Tip:
The Virtual Channel Link Table view
is used to create PVCs and the Virtual
Path Link Table view is used to create
PVPs. See Creating PVCs and PVPs
before attempting to perform these
tasks.