Specifications

ATM Creating PVCs and PVPs
Device Management Page 125 SmartSwitch 9000/9500 Series
The VC Cross Connect Table View (Page 120)
displays.
12 Follow the instructions in this view to cross
connect the two ports for which you defined
links. Cross connecting establishes the PVC.
Virtual Channel Link Table View
Access: From the Icon Subviews menu for the Switch
Application icon, select Links > Virtual Channels.
This view provides the following configuration
information for the Virtual Channel Links (VCLs).
IF Index
The interface number
VPI
The VPI value of the VCL.
VCI
The VCI value of the VCL.
Admin Status
The desired administrative state of the VCL. Up
indicates that the traffic flow is enabled; Down
means disabled. (This field is used only for a VCL
that terminates a VCC, i.e., one that is not cross
connected to other VCLs.)
Oper Status
The current operational status of the VCL. Up
means that the VCL is currently operational; Down
means not operational. Unknown means that the
status cannot be determined.
Last Change
The value of Sys Up Time at the time this VCL
entered its current operational state. If the
Note:
Note:
You should return to the Virtual
Channel Link Table view to ensure
that the PVC has been set properly.