Specifications

ATM Creating PVCs and PVPs
Device Management Page 126 SmartSwitch 9000/9500 Series
current state was entered prior to the last re-
initialization of the agent, the value is 0.
Rcv Descr Index
The row in the ATM Traffic Descriptor Table that
applies to the receive direction of this VCL.
Xmit Descr Index
The row of the ATM Traffic Descriptor Table that
applies to the transmit direction of this VCL.
Cross Connect Id
Implemented only for a VCL that is cross
connected to other VCLs that belong to the same
VCC. All such VCLs have the same value, which is
reflected in the VC Cross Connect Table View
(Page 120).
Row Status
Used to create, delete, or modify a row in this
table. Follow the procedure given in the view to
make a change.
Virtual Path Link Table View
Access: From the Icon Subviews menu for the Switch
Application icon, select Links > Virtual Paths.
This view provides the following configuration
information for the virtual path links.
IF Index
The interface number.
VPI
The VPI value of the Virtual Path Link (VPL). Note
that a VPI value of 0 is not used for a VPL not
associated with a VCL. The maximum VPI value
cannot exceed the value allowable by the
interface’s maximum VPI.
Admin Status
The desired administrative state of the VPL. Up
indicates that the traffic flow is enabled for this
VPL. Down means disabled. (This field is used only
for a VPL that terminates a VPC, i.e., one that is
not cross connected to other VPLs.)
Oper Status
The current operational status of the VPL. Valid
values are: Up, Down, or Unknown.
Last Change
The value of Sys Up Time at the time this VPL
entered its current operational state. If the