Specifications

ATM Traffic Parameter Table View
Device Management Page 127 SmartSwitch 9000/9500 Series
current state was entered prior to the last re-
initialization of the agent, the value is 0.
Rcv Descr Index
The row in the Traffic Parameter Table that
applies to the receive direction of the VPL.
Xmit Descr Index
The row in the Traffic Parameter Table that
applies to the transmit direction of the VPL.
Cross Connect Id
Implemented only for a VPL that is cross
connected to other VPLs that belong to the same
VPC. All such VPLs have the same value, which is
reflected in the VP Cross Connect Table.
Row Status
Used to create, delete, or modify a row in this
table. Use the procedure given in the view to
make a change.
Traffic Parameter Table View
Access: From the Icon Subviews menu for the Switch
Application icon, select Traffic Parameter.
This view lets you create and modify traffic
parameters or descriptors using the instructions
given in the view. This should be done before
creating PVCs and PVPs. The view contains the
following fields.
Index
Used by the Virtual Link Table (VPL or VCL Table)
to identify the row of this table.
Descr Type
Type of ATM traffic descriptor. The type may
indicate no traffic descriptor or a traffic descriptor
with one or more parameters. These parameters
are specified as a parameter vector in the
corresponding instances of Param 1, Param 2,
Param 3, Param 4, and Param 5.
Param 1, 2, 3, 4, or 5
Parameter of the ATM traffic descriptor used
according to the value of Descr Type.
QoS Class
A value identifying one of four QoS classes
specified in the ATM Forum UNI specification as
follows: