Specifications

ATM ILMI Network Prefix Table View
Device Management Page 128 SmartSwitch 9000/9500 Series
• 1 = Service Class A, Constant Bit Rate and is
used for video and circuit emulation.
• 2 = Service Class B, Variable Bit Rate and is
used for video and audio.
• 3 = Service Class C and is used for
connection-oriented data transmission.
• 4 = Service Class D and used for
connectionless data transmission. An
unspecified QoS (value 0) is used for “best-
effort” traffic.
Row Status
Used to specify the state of the row in this table.
The possible states are: Active, Not in
service, Not ready, Create and go, Create
and wait, and Destroy.
ILMI Network Prefix Table View
Access: From the Icon Subviews menu for the Switch
Application icon, select ILMI Network Prefix.
This table specifies per-interface network
prefix(es) supplied by the network side of the UNI
during ILMI address registration. When no
network prefixes are specified for a particular
interface, one or more network prefixes based on
the switch address(es) may be used for ILMI
address registration.
Interface
Information about a single network prefix
supplied by the network side of the UNI during
ILMI address registration.
Network Prefix
The network prefix specified for use in ILMI
address registration.
Row Status
Used to create, delete, activate and de-activate
network prefixes used in ILMI address
registration.