Specifications
ATM Signalling Monitoring Table View
Device Management Page 131 SmartSwitch 9000/9500 Series
Signalling Monitoring Table
View
Access: From the Icon Subviews menu for the Switch
Application icon, select Signalling Monitoring.
SSCOP Table
This table displays the following information:
Interface
The interface number.
SSCOP Connection Events
SSCOP Connection Events Counter. This counter
counts the sum of the following errors:
• SSCOP Connection Disconnect Counter.
The abnormal occurrence of this event is
characterized by the expiry of
Timer_NO_RESPONSE.
• SSCOP Connection Initiation Failure. This
condition indicates the inability to establish
an SSCOP connection. This event occurs
whenever the number of expiries of the
connection control timer (Timer_CC) equals or
exceeds the MaxCC, or upon receipt of a
connection reject message BGREJ PDU.
• SSCOP Connection Re-Establ/Resynch.
This event occurs upon receipt of a BGN PDU
or RS PDU.
SSCOP Errored PDUs
SSCOP Errored PDUs Counter. This counter
counts the sum of the following errors:
• Invalid PDUs. These are defined in SSCOP
and consist of PDUs with an incorrect length
(MAA-ERROR code U), an undefined PDU type
code, or that are not 32-bit aligned.
• PDUs that result in MAA-ERROR codes and
are discarded.
Detected Events Table
This table displays the following information:
Interface
The interface number.
Call Setup Attempts
Call Setup Attempts Counter. This counter counts
the number of call setup attempts (both
successful and unsuccessful) detected on this
interface.
Routes Unavailable
Number of Route Unavailability detected on this
interface. This counter is incremented when a
RELEASE, RELEASE COMPLETE (only when not
preceded by a RELEASE message for the same
call), ADD PARTY REJECT, or STATUS message
that contains one of the following cause code