Specifications

ATM Signalling Monitoring Table View
Device Management Page 132 SmartSwitch 9000/9500 Series
values is received. See Table 36 for applicable
cause values and meanings:
Resources Unavailable
Number of Resource Unavailability detected on
this interface. This counter is incremented when
a RELEASE, RELEASE COMPLETE (only when
not preceded by a RELEASE message for the
same call), ADD PARTY REJECT, or STATUS
message that contains one of the following cause
code values is received. See Table 37 for
applicable cause values and meanings. (Note:
These cause values apply to both UNI3.0 and
UNI3.1 unless otherwise stated):
Called Party
Number of Called Party Responsible For
Unsuccessful Call detected on this interface. This
counter is incremented when a RELEASE,
RELEASE COMPLETE (only when not preceded
by a RELEASE message for the same call), ADD
PARTY REJECT, or STATUS message that
contains one of the following cause code values is
received. See Table 38 for applicable cause values
and meanings. (Note: These cause values apply to
both UNI3.0 and UNI3.1):
Table 36: Routes Unavailable
Cause Value Meaning
1 Unallocated (unassigned) number.
2 No route to specified transit network.
3 No route to destination.
Table 37: Resources Unavailable
Cause Value Meaning
35 Requested VPCI/VCI not available.
37 User cell rate not available (UNI3.1 only).
38 Network out of order.
41 Temporary failure.
45 No VPCI/VCI available.
47 Resource unavailable, unspecified.
49 Quality of Service unavailable.
51 User cell rate not available (UNI3.0 only).
58 Bearer capability not presently available.
63 Service or option not available, unspecified.
92 Too many pending add party requests.
Table 37: Resources Unavailable
Cause Value Meaning