Specifications
ATM Signalling Monitoring Table View
Device Management Page 135 SmartSwitch 9000/9500 Series
Timer Expired
Number of Timer Expiries detected on this
interface. The Timer Expiries Counter provides a
count of network timer expiries, and to some
extent, host or switch timer expiries. The
conditions for incrementing this counter are:
• Expiry of any network timer
• Receipt of a RELEASE or RELEASE
COMPLETE message with Cause #102,
'recovery on timer expiry'.
Restarts
Number of Restart Activity errors detected on this
interface. The Restart Activity Counter provides a
count of host, switch, or network restart activity.
This counter is incremented when receiving a
RESTART message.
Incoming SVC VCCs Established
Number of SVC VCCs established at this
signalling entity for incoming connections.
Transmitted Events Table
Interface
The interface number.
Call Setup Attempts
Call Setup Attempts Counter. This counter counts
the number of call setup attempts (both
successful and unsuccessful) transmitted on this
interface.
Routes Unavailable
Number of Route Unavailability transmitted from
this interface. This counter is incremented when
a RELEASE, RELEASE COMPLETE (only when
not preceded by a RELEASE message for the
same call), ADD PARTY REJECT, or STATUS
message that contains one of the following cause
code values is transmitted. See Table 36 (Page
132) for applicable cause values and meanings.
Resources Unavailable
Number of Resource Unavailability transmitted
from this interface. This counter is incremented
when a RELEASE, RELEASE COMPLETE (only
when not preceded by a RELEASE message for
the same call), ADD PARTY REJECT, or STATUS
message that contains one of the following cause
code values is transmitted. See Table 37 for
applicable cause values and meanings.
Called Party
Number of Called Party Responsible For
Unsuccessful Call transmitted from this interface.
This counter is incremented when a RELEASE,
RELEASE COMPLETE (only when not preceded
by a RELEASE message for the same call), ADD
PARTY REJECT, or STATUS message that
contains one of the following cause code values is