Specifications

Manual Modeling Modeling the Chassis
Device Management Page 146 SmartSwitch 9000/9500 Series
For the purpose of this chapter, the Topology
Views are defined as follows:
• Topology View refers to the view that the
FDDI LAN (backplane), other networks (front
panel interfaces), and some modules are
modeled in
• FDDI LAN Topology View refers to the view
that contains the FddiMAC models that
represent the connections to the FNB
Modeling the Chassis
The SmartSwitch 9000 chassis is modeled
indirectly using one of the modules it contains.
Model one of the modules contained within the
chassis as follows:
1 Using a copy of the worksheet provided (Table
43) identify the modules contained in the
SmartSwitch 9000 to be modeled.
2 Select one of the modules listed on the
worksheet.
3 Refer to Modeling the Modules in the Chassis
(Page 149) section and model the selected
module.
Once the first module has been modeled and an
icon representing that module exists, the Chassis
icon is automatically created and placed in the
Lost &Found View.