Specifications

Manual Modeling Modeling the Chassis
Device Management Page 148 SmartSwitch 9000/9500 Series
Placing the Chassis Location Icon
in the Location View
The Chassis Location icon must be copied into a
Room Location View to allow access to the views
available from the Location icon. Create a Room
Location View as follows:
1 From the View menu select New View >
Location.
2 From the File menu select Edit > New
Model.
3 Select the desired location (Building, Country,
etc.) from the Select Model Type dialog box.
Click OK.
4 Enter a Name for the Location View created
and a Security String (optional) in the
Creating Location dialog box. Click OK.
5 When the icon appears in the Location View,
exit the Edit mode.
6 Double-click the icon to open its Location
View.
7 Repeat steps 3 through 8 until the Select
Model Type dialog box lists the Room Location
model type. Create the Room Location model.
8 Locate the Chassis icon in the Lost & Found
View as follows:
a Select New View from the View menu.
b Select Lost & Found from the New View
menu.
9 Copy the Chassis Location icon into the Room
View as follows:
a From the Lost & Found View, select Edit
from the File menu.
b Select the MMACPlus model type and
select Copy from the Edit menu.
c Go back to the Room Location View and
select Edit from the File menu.
d Select Paste from the Edit menu and exit
the edit mode.
e Return to the Lost & Found View and click
the right mouse button to exit the Edit
mode. Click the right mouse button to exit
the Lost & Found View.