Specifications

Device View Device Views
Device Management Page 22 SmartSwitch 9000/9500 Series
Interface Number Label
This label displays the number identifying this
interface. The first number represents the slot
that this module resides in. The second number
represents the interface number on this module.
Interface Status Label
This label displays the current Operational Status
of the interface. It also provides double-click
access to the Port Configuration - CSIIf Port View
(Page 49).
Table 2 and Table 3 list the possible states
relative to the application selected. The default
application for this view is Physical (MIB-II).
Port Type Label
This label displays the type of network interface
module.
MAC Address Label
This label displays the physical (MAC) address of
the interface. Double-click the label to open the
Interface Address Translation table, which cross-
references network addresses (IP addresses) to
physical (MAC) addresses for selected nodes
between networks. Double-clicking on any
column entry opens an address-specific Address
Translation Table Information view. This view
provides the same information as the
Table 2: Interface Status for the Physical
Application
Color Status Description
Green ON Port is operational.
Blue OFF Port is off.
Yellow TST Port is in the test mode.
Table 3: Administrative Status for the
Bridging Application
Color Status Description
Green FWD Bridge port is forwarding.
Blue DIS Port is disabled.
Magenta LST Bridge is in the listening mode.
Magenta LRN Bridge is in the learning mode.
Orange BLK Bridge port is in the blocking
mode.
Red BRK Bridge port is broken.
Blue ??? Status is unknown.