Specifications

Device View Secondary Address Panel
Device Management Page 23 SmartSwitch 9000/9500 Series
corresponding row for the IF Address Translation
table, but allows you to modify field values.
IP Address Label
This label displays the IP address for the
interface. Double-click this label to open the
Secondary Address Panel (Page 23), which lets
you change the address and mask for the
interface.
Interface Icon Subviews Menu
Selections
Table 4 describes each of the Icon Subviews
menu selections, available from the interface
icon, that are available to all or most of the
devices available to the SmartSwitch 9000 Series.
Depending on the device type. Some of these
views may not be available.
Secondary Address Panel
Access: From the Icon Subviews menu for the Interface
icon in the Device view, select Secondary Address Panel.
This panel provides a table of IP addresses and
masks obtained from the Address Translation
table within the device’s firmware. You can
change the current address displayed in the IP
Address field by selecting an entry from the table
in this panel and clicking the Update button.
Table 4: Interface Icon Subviews Menu
Selections
Option Opens the...
Sub-Interface Sub-Layer Information view. (See
SPECTRUM Views).
Configuration Port Configuration - CSIIf Port View
(Page 49).
Secondary Address
Panel
Secondary Address Panel View.
Thresholds Interface Threshold view, which
lets you set the on/off alarm
thresholds for load, packet rate,
error rate, and % discarded for the
interface.
Model Information Model Information View (Page 50).