Specifications

Device View Secondary Address Panel
Device Management Page 32 SmartSwitch 9000/9500 Series
INB 1 and INB 2 Icons
The Internal Network Bus (INB) icons (see
Figure 9 on Page 30) represent the connections
between the module and the INB 1 and INB 2.
Table 9 describes the possible operational states.
Table 8: FNB 1 and FNB 2 Status Descriptions
Color Status Description
Blue --- The module is not connected to the
FNB but has the potential to be
connected.
Blue DIS The module is disabled.
Yellow CON The module is in the process of
connecting to the FNB.
Green ACT The module is connected to the FNB
and is active.
Red SBY The module is in standby mode.
Red --- Problems have occurred reading and
determining the status of the interface.
Table 9: INB 1 and INB 2 Status Descriptions
Color Status Description
Blue OFF The module is not connected to the
INB.
Green ON The module is connected to the INB.
Yellow TST The interface is in the test state.
Grey - - - The interface for this module could not
be found.
Red - - - Problems have occurred reading and
determining the status of the
interface.