Specifications

Device View Secondary Address Panel
Device Management Page 34 SmartSwitch 9000/9500 Series
Chassis Environmental Information
This area of the Device view also indicates the
environmental status of the chassis. These panels
and their fields are as follows:
Climate
• Temp - displays the ambient temperature of
the room in which the chassis is located.
- Green - normal, cool, or cold
- Yellow - warm
- Red - hot
- Blue - unknown
• Humidity - displays the humidity value of the
air flowing through the chassis.
- Green - dry, normal, or moist
- Blue - unknown
Fan Status/Speed
• F1 through F4 - displays the fan speed in
percent of maximum speed for each of the
four fans in the chassis.
- Green - normal, or testing
- Yellow - unknown
- Red - slow, inoperative, or off
• Auto/Full - allows you to set the fans to Auto
(speed controlled by the temperature of the
chassis) or Full (speed set to maximum).
Power Subsystem
• Total - displays the maximum power that
could be supplied by the chassis power
supply.
• Used - displays the total power currently
being supplied by the chassis power supply.
• Avail - displays the available power from the
chassis power supply.
• Status - displays the status and type of power
for the chassis: AC, DC, or Battery.
- Green - power normal.
- Yellow - over current, over voltage, or
under voltage.
• Redundancy - displays the source of the
power for the chassis.
- Redundant - indicates that power from the
secondary power source is being used for
the chassis.
- NON-Redundant - indicates that power
from the primary power source is being
used for the chassis.
• Main Pwr Bus - displays the voltage of the
chassis’s main power bus. The value can
range between 40 and 60 volts DC.
- Green - power normal.