Specifications

FDDI FddiMAC Device Configuration View
Device Management Page 56 SmartSwitch 9000/9500 Series
FDDI Port Label Icon Subviews
Menu Selections
Table 15 describes each of the device-specific Icon
Subviews menu selections available for the FDDI
Port Label.
FddiMAC Device Configuration
View
Access: Highlight the FDDI Ring Labels in the Chassis
Device views and from the Icon Subviews menu, select
FDDI Configuration.
This view provides information on the
configuration and operating status of the Station
Configuration.
Station Configuration
This area of the FddiMAC Device Configuration
view provides information specific to the FDDI
station:
Ring State
The current state of the FDDI Ring. Table 16 lists
the possible states and their descriptions.
Table 15: FDDI Port Icon Subviews Menu
Options Opens the...
Enable/Disable Port Allows you to Enable or Disable the
port.
Port Configuration FDDI Port Configuration View
(Page 58).
Table 16: FDDI Ring States
Ring States Description
Isolated The concentrator is not attached to the ring.
Non-Op The concentrator is attempting to enter the
ring.
Ring-Op The ring is operational.
Detect The claim/beacon process of the FDDI ring
protocol has exceeded 1 second. This
indicates a potential problem.
Non-Op-Dup The ring failed to complete the
claim/beacon process because a duplicate
FDDI address has been detected.
Ring-Op-Dup The ring is operational, but a duplicate
FDDI address has been detected.