Specifications

FDDI Repeater Configuration View
Device Management Page 60 SmartSwitch 9000/9500 Series
Link Error Rate Alarm
The link error rate threshold that, if exceeded,
generates an alarm for the port. The default link
error rate alarm threshold is 8, which represents
1.25 bit errors per second.
Link Error Monitor Reject Count
The link error monitor count of the times the link
has been rejected.
Repeater Configuration View
Access: Within the Application views, highlight the
CsEnetRptr Icon, and from the Icon Subviews menu, select
Configuration or from within the Chassis Device views,
highlight the Repeater Labels and from the Icon Subviews
menu, select Repeater Configuration.
This view provides information on the
configuration and operating status of the network
the repeater is monitoring.
Repeater Management
This area of the Repeater Configuration view
provides the following port information:
Port Count
The total number of ports on this LAN segment.
Ports On
The total number of ports currently in the ON
state on this network.
Ports Operational
The number of operational ports on this network.
Network Ports
Allows you to select the desired operational state
of network ports on this network segment. Valid
values are: Enable or NoEnable.
Network Port Security
Allows you to select the security status of repeater
ports. Valid values are: UnLocked or Locked.
Source Address Management
This area of the Repeater Configuration view
indicates the timeout period, in seconds.
Ageing Interval
The time, in seconds, that dynamically learned
forwarding information remains in the database
before being selected.
Trap Configuration
This area of the Repeater Configuration view
allows you to enable or disable any of the
following types of traps.