Specifications

Token Ring Overview
Device Management Page 67 SmartSwitch 9000/9500 Series
Token Ring Label
Figure 23 represents the Token Ring connection
and displays the ring number it represents.
Double-click this label to access the Token Ring
Configuration View (Page 69).
Token Ring Label Icon Subviews
Menu Selections
Table 20 describes each of the device-specific Icon
Subviews menu selections available for the Token
Ring Label.
Ring Speed Label
The speed this ring is configured to operate at (4M
or 16M). Double-click on this area to open the
Change Ring Speed view for the selected ring.
This view allows you to set the desired ring speed.
Token Ring Port Labels
These labels display information pertaining to the
network interface module ports as follows:
Port Number Label
The port on the ring.
Port Status Label
The status of this port. Table 21 lists the possible
conditions values and associated colors.
Table 20: Token Ring Icon Subviews Menu
Options Open the...
Configuration Token Ring Configuration View
(Page 69).
Model Information Model Information View (Page 50).
Stations Token Ring Station Table View
(Page 73).
Station Errors Token Ring Station Isolating Errors
View (Page 75).
Speed Fault Token Ring Station Detail View
(Page 80).
Change Ring Speed Allows you to set the ring speed to 4M
or 16M.
Table 21: Port Status Conditions and Colors
Condition Color
INIT (Initial) Gray
ENB (Enabled) Yellow
BYP (Bypassed) Blue
DIS (Disabled) Blue
INS (Inserted) Green
ACT (Active) Green
WRP (Wrapped) Red