Specifications

Token Ring Token Ring Configuration View
Device Management Page 69 SmartSwitch 9000/9500 Series
Token Ring Configuration
View
Access: Within the Application view, highlight the CsTRApp
and from the Icon Subviews menu, select Configuration,
This view provides information on the
configuration of the Token Ring application.
Ring Name
The ASCII name assigned to this ring. This name
defaults to Network n, where n is a unique integer
value.
Ring Number
The number of the attached ring. If SPECTRUM
cannot determine the number of the ring, a zero
is returned.
Ring Speed
The speed of the ring, which has a value of 4 or 16
megabits.
Ring Status
The operational state of the ring.
Opens the TR Ring Configuration View (Page 70).
Opens the Token Ring Security Configuration View
(Page 72).
Opens the Token Ring Station Alarm Thresholds
View (Page 79).
Port Configuration
This section of the Token Ring Configuration view
provides the following information:
Station Ports ON Out Of
The total number of enabled station ports on the
addressed module.
Enable All Station Ports
Allows you to enable all the station ports in this
port group by setting the value to Enable. The
default value is NoEnable.
Ring Ports ON Out Of
The total number of enabled ring in/ring out
ports in this port group.
Enable All Ring Ports
Allows you to enable all the ring ports in this port
group by setting the value to Enable. The default
value is NoEnable.
Ring Configuration
Ring Security
Alarms Table