Specifications

Token Ring Token Ring Configuration View
Device Management Page 70 SmartSwitch 9000/9500 Series
Host Configuration
This section of the Token Ring Configuration view
provides the following information:
Commands
Allows you to send commands to the device.
Possible commands are: HardwareReset,
SoftwareReset, Open, and Close. The default
value is NoOperation.
Error Report Timer
The time interval in which the host adapter
reports errors to the ring error monitor.
Open Status
The status of the device, or errors it has received,
with respect to insertion into the ring.
Active Monitor Contention
Allows you to prohibit the possibility of the device
becoming the active monitor for the ring by
setting the proper Allowed or NotAllowed status.
Host Error Status
This box in the Host Configuration section of the
Token Ring Configuration view provides a series
of read-only indicator buttons detailing the last
error status returned by the Device.
TR Ring Configuration View
Access: In the Token Ring Configuration view, click the
Ring Configuration button.
This view provides configuration information on
the ring to which the ports are attached.
Ring Configuration
This section of the TR Ring Configuration view
displays the following information:
Ring Name
The ASCII name assigned to this ring. This name
defaults to Network n, where n is a unique integer
value.
Ring Number
The number of the attached ring. If SPECTRUM
cannot determine the number of the ring, a zero
is returned.
Ring Speed
The speed of the ring, which can have a value of 4
or 16 megabits.
Ring Status
The operational state of the ring.
Active Monitor
The MAC address of the active monitor for the
ring. This address will appear in any tables with
an asterisk (*) to identify it.