Specifications

Token Ring Token Ring Configuration View
Device Management Page 71 SmartSwitch 9000/9500 Series
Active Stations
The number of active stations currently inserted
on the ring.
Beacon Recovery
Provides a button, allowing you to Enable or
Disable automatic beacon recovery for the TR
MicroLAN Switch Module. When Disabled, the TR
MicroLAN Switch Module will not attempt to
reinsert itself into the ring after entering a
beaconing state. If the device does not support
automatic beacon recovery, SPECTRUM will
display a status of “Invalid”.
Ring Alarm/Threshold/State
This section of the TR Ring Configuration view
has three columns, displaying information on the
ring alarms, their current thresholds, and their
states (Enabled or Disabled).
Ring Purges
Allows you to set a value for the Ring Purges
alarm threshold, and the state button allows you
to Enable or Disable detection of this alarm.
AMP Errors
Allows you to set a value for the Active Monitor
Error alarm threshold, and the state button
allows you to Enable or Disable detection of this
alarm.
Claim Token Errors
Allows you to set a value for the Claim Token
Errors alarm threshold, and the state button
allows you to Enable or Disable detection of this
alarm.
Lost Frames
The threshold field allows you to set a value for
the Lost Frames alarm threshold, and the state
button allows you to Enable or Disable detection
of this alarm.
Token Errors
Allows you to set a value for the Token Errors
alarm threshold, and the state button allows you
to Enable or Disable detection of this alarm.
Beacon State
Allows you to set a value for the Beacon State
alarm threshold, and the state button allows you
to Enable or Disable detection of this alarm.
Frame Count
Allows you to set a value for the Frame Count
alarm threshold, and the state button allows you
to Enable or Disable detection of this alarm.
Ring Timebase
Allows you to set the timebase used for getting
and setting all alarms pertaining to this ring. This
value is measured in seconds.